Tuesday, June 26, 2012

The Awesome Alpha Tent


When we posted our adventures with the Survival Net, one of our readers sent a link that he thought Sir Knight might enjoy.  The link was for the Alpha tent, fashioned from nothing more than a USGI Military Issue Poncho, tent poles and 4 wire nuts.  Thats it!  The wonderful thing about this tent is that is consists mainly of things you already carry in your gear so you are not adding unnecessary weight and bulk.  And, did I mention this was really cool?  To get the real skinny on this tent, and the gentlemen who came up with the idea, you must go to his site, Alpharubicon.  He has dimensions, specifics on the components and explanations for the uses of the Alpha tent.

Knowing a good thing when he sees it, Sir Knight began compiling the necessary articles to put together his own Alpha tent.  He already had a USGI poncho, so he laid it on the ground and measured it to be sure it was the same size as the one used on the Alpha tent site.  Next, he dug up some tent poles that we had saved from a long-ago defunct tent, measured them and proceeded to cut them down to the correct size for the tent.  Sir Knight cut each pole to the same size, rather than just cutting down the one pole that was too long, so that the tent poles bent in the correct manner when inserted into the poncho.  After cutting the poles, he strung the shock cord through the modified poles, tied it off at the end and fitted RED wire nuts to each end of the poles.  The wire nuts keep the poles from going through the grommets on the corners of the poncho and red wire nuts are the perfect size.  The directions on the Alpha tent website instruct you to drill a hole through the wire nuts and run the shock cord through the holes and tie them off.  Because of technical difficulties with our poles, we glued the wire nuts on instead.  The shock cord through the nuts would have been a better option, however, we made do with the materials that were available to us.

Wire nuts through the grommets
Once the tent poles were inserted into the grommets, we tied them down with cording that was already in the poncho.  It was almost like they were designed with the Alpha tent in mind!  Within a matter of minutes we had put together a lightweight one man tent, camouflaged and with a reduced IR signature, with nothing but a poncho, 4 wire nuts and some cast-off tent poles.  The folks at Alpharubicon really know their stuff!

Poles tied to the cording
The Alpha tent can even float your gear across creeks!
Very roomy
It makes perfect sense to fill your 1st and 2nd line kits with a few articles that have multiple purposes.  Rather than carrying a poncho and survival net and a hammock and a tent, you can carry a poncho, a net and a few odds and ends and still have all your bases covered.

USGI Poncho's can be challenging to find, but really, you can use any poncho.  The difference is that you will have to measure your poncho and customize your tent poles accordingly.

Thank you for coming along for the ride as Sir Knight and I pare down our kits to the bare essentials and find out what works and what doesn't.  Try an Alpha tent of your own and let us know what you think.

3 comments:

  1. Enola, thanks for this article! I just found a USGI poncho at a local army surplus store, and had planned on using it as a simple tube tent, with paracord. But now I am going to look for old tent poles and make the Alpha Tent. I went to the alpharubicon site, and this is such a fantastic idea. I love it!

    (I always learn so much from your site! Please keep up all this great work!)

    ReplyDelete
  2. What a great and simple setup. I used to make a tent using 550 cord and tree branches but this one is so much better. I would also recommend having two ponchos, really no extra weight. Take the second poncho and snap it to the top poncho to create a water proof floor.

    ReplyDelete